A4158.1 nature
Light yellow, bio-based EVA hot-melt adhesive in stick format for industry and trade/handcraft.
- Proportion of biogenic carbon: 33%
- All-rounder for assembly in industry, household and floristry
- FDA Guideline 175.105
Adhezivno talilno lepilo D1586.1
Univerzalno uporabno adhezivno talilno lepilo za fiksiranje in montažo v mnogih industrijskih panogah, npr. za samolepilne predhodne premaze za strešne podloge.
- Zelo dobra kohezija in adhezija
- Zelo dobra absorpcija povratnih sil
- Samolepilno opremljanje strešnih podlog
avenia A3922
Vsestransko vroče lepilo iz oksidacijsko stabilne serije avenia. Predvsem za embalažno industrijo, npr. za industrijsko uporabo kartonske embalaže, zabojčkov, pladnjev ali zložljivih škatel.
- Zelo hitra absorpcija velikih povratnih sil
- Nizka stopnja jakosti vonjav
- • Zelo dobra oksidacijska stabilnost
avenia A3999 low-temp. nature
Oksidacijsko stabilno talilno lepilo na bio-osnovi za nizkotemperaturno uporabo v embalažni industriji.
- Delež biogenega ogljika: 39,5 %
- Nizka temperatura obdelave prihrani energijo
- Dobra oksidacijska stabilnost v talini
- Za hitro delujoče avtomatske naprave
- Direktiva FDA 175.105
avenia B3571
Vsestransko uporabno talilno lepilo za industrijsko uporabo, posebej primerno za lepljenje v pakirni industriji, vključno z embalažo za globoko zamrzovanje ter izdelavo zaslonov.
- Za zahtevne površine
- Nizka stopnja jakosti vonjav
- Srednji čas strjevanja z zelo dobro oksidacijsko stabilnostjo
avenia B3771 nature
White bio-based hot-melt adhesive for industrial applications in the packaging industry, e.g. coated cardboard and fast carton erectors.
- Proportion of biogenic carbon: 41%
- High absorption of restoring forces
- Good adhesive spectrum
- Excellent oxidation stability
B3797-300
White, low odour polyofin in stick form for industrial applications. Particularly suitable for packaging with high restoring forces, e.g. folding boxes, displays and coated cardboard.
- 300 mm length
- Low odour
- Very good price/performance ratio
- Packaging industry
B401/44-BS20 Surface application head
The one4all B401-BS20 enables the application of an adhesive film up to 20 mm wide.
- Compatible with Nordson and Robatech
- Good price-performance ratio
- Incl. 1 BS20 module
- Air opening / Spring closing
Cartridge preheater K725
Cartridge preheater K 725 for 2 cartridges. Enables uninterrupted work with cartridge devices.
- Heated, PTFE-coated chambers
- Very fast heating-up time: 20 minutes to 140 °C
- Digital status display
- Reduction of waiting time to increase productivity
- Silicone-free
Console HB 720
Console for the HB 720 series
- Secure pick-up position
- Fixed storage of the gun
- Including pressure regulator
E3848 ME, Micro-emission, brez označevanja
Zelo dobra začetna trdnost in zelo dobra adhezija na različnih substratih, primerno je npr. za montažno lepljenje v notranjosti avtomobilov. Zaradi proste vsebnosti MDI < 0,1 % je izdelek brez označevanja.
- MDI < 0,1 % = brez označevanja
- Dobra možnost pršenja
- Dobra začetna trdnost
EVA adhesive A2075.1
The hot-melt adhesive is used in industry, floristry, household and hobby.
- Universal for household, hobby and floristry
- Water-clear and flexible
- Light to medium assembly bonding
- Available in 200 & 300 mm lengths
Granulate conveyor for melters
- Reduced operating time and risk of injury
- Reduced temperature fluctuations in the melt
- Reduces adhesive cracking and contamination
- Alarm system with visual and acoustic signal
HB 20 BS Surface application head
The HB 20 BS is used to apply an adhesive film up to 20 mm wide.
- Including 1 wide-slot module
- PT100 sensor or Ni120
- Air opening / Spring closing
- Maximum application width 20 mm
HB 4070 connect
The melter has a 7-litre stainless steel tank and enables gentle melting of PA hot-melt adhesives in the form of granules, pillows or blocks up to 200 °C. The use of two different tank materials with different thermal conductivity protects the hot-melt adhesive from thermal stress. Optionally available as a high-temperature version.
HB 4150 connect
Heated hot-melt adhesive applicator with a 15-litre stainless steel storage tank. The use of two different tank materials with different thermal conductivity protects the hot-melt adhesive from thermal stress. Suitable for processing PA hot-melt adhesives in the form of granules, pillows or blocks up to 200 °C. Optionally available as a high-temperature version up to 230 °C.
HB 4250 connect
Heated hot-melt adhesive applicator with a 25-litre stainless steel storage tank. The use of two different tank materials with different thermal conductivity protects the hot-melt adhesive from thermal stress. Suitable for processing, among other things, PA hot-melt adhesives in the form of granules, pillows or blocks up to 200 °C. Also optionally available as a high-temperature version up to 230 °C.
Hot Melt Glue Gun HB 250
- Pull-off forces reduced by 30% for fatigue-free working
- Digital status display integrated in handle
- Temperature locking
- Stroke limiter
- Removable nozzle (standard diameter 3.0 mm)
Hot Melt Hoses for Application Heads - Bead
Hot melt hose for bead application heads in combination with melters.
- Standard temperature sensor PT100
- Up to 200 °C in the standard version
- Lengths 1.2 m – 6.0 m
Hot Melt Hoses for Application Heads - Spray
Hot melt hose for spray application heads in combination with melters.
- Standard temperature sensor PT100
- Up to 200 °C in the standard version
- Lengths 1.2 m – 6.0 m
material nozzle B34S
The main body of the one4all spray nozzle B34S is made of stainless steel.
- Compatible with Nordson and Meltex EP34S
- Diameters from 0.6 to 1.0 mm available
Multi-bore nozzle, 2 bore holes
The one4all 2B multi-bore nozzles are available with 2 bore holes for bead application.
- Compatible with Nordson H200 / H400 / SolidBlue / MiniBlue
- Compatible with Robatech and ITW-Dynatec (Micro)
- Suitable for BÜHNEN
- Different diameters for dot and bead application
Nozzle HB 240 / 250
Nozzle for HB 240 / 250 for bead application
PO adhesive B0524
For assembly bonding and surface lamination in the industrial and craft sectors, especially in the concrete industry, as well as upholstery and foam lamination
- Concrete industry, especially recommended for the colder seasons
- Very long open time
- Inlays in suitcases
- Good cold flexibility
- Sprayable
PO Adhesive B0715
The all-rounder among PO hot melts for industry and trade:
- Universal: Suitable for bead and spray.
- Very wide adhesion spectrum –– high combinability
- High cohesion – internal strength with good thermal stability
- Balanced application properties
- Concrete Industry
PO Adhesive B1052.1
Foam bonding and suitcase upholstery
- Sprayable
- Very long open time
- Soft glue line
- Case manufacture
PO Adhesive B1063.1
This adhesive is characterised by the combination of its properties:
- Universal: Suitable for bead and spray.
- Broad adhesion spectrum – many materials can be combined
- High cohesion – high internal strength combined with a high heat resistance
PO Adhesive B1596
This adhesive is preferred in the mattress and upholstery industry.
- Short setting time
- For large areas
PO Adhesive B1730
Suitable for interior applications in the automotive industry
- High thermal stability
- High initial strength
- Very wide adhesion spectrum
Pressure-sensitive adhesive D1341
Pressure-sensitive hot-melt adhesive for inline bonding processes in the automotive industry, e.g. luggage compartment interior lining / lamination of needle felt on carrier materials.
- Very high heat resistance
- Very high cohesion
Pressure-sensitive adhesive D3043 LT
Universally applicable pressure-sensitive hot-melt adhesive for fixing and assembly in many branches of industry. Particularly well suited for applications in the low temperature range.
- Good adhesion for assembly applications
- Good adhesion properties, e.g. PE film
- Barely visible glue joint
- For temperature-sensitive surfaces
- Resource-saving
Spacer plates BS20
The BS20 spacer plates are used in one4all surface application heads with BS20 modules.
- Stainless steel
- Layer thickness 0.15 to 0.5 mm
- Application width 15 mm, 20 mm
Spray nozzle set 3/8''
Spray nozzle set for HB 910 Spray
- Set: Swirl nozzle, air cap and swivel nut
- Ø 0.8 mm – 2.0 mm
- Thread: 3/8"
Workstation HB 720
For stationary use of HB 720 guns
- Fixed mounting in the stand
- Hands-free operation by means of the foot-operated switch
- Pressure regulator included
Adapter for HB 240 / 250 nozzles
- Adapter UNF 9/16 to UNF 7/16
- Use of nozzles from other device series on HB 240 / 250
- Incl. seal
Adapter, pivoted
The adapters are used to connect the melter and the hot melt hose or to connect the application head and the hose.
- Compatible with Nordson
- Suitable for BUEHNEN
- Screw thread male / female
- Different connection angles
avenia B3570 LT
Versatile hot-melt adhesive for industrial applications in the packaging industry, such as crates, trays, cardboard packaging and folding cartons.
- Low processing temperature 120 – 140 °C
- Low odour
- Short setting time
- Very good oxidation stability
avenia B3706
The first avenia hot-melt adhesive for the concrete industry. It achieves the desired balancing act between bonding and removability on a completely new level in the manufacturing industry.
- Very good oxidation stability in the melt
- Residue-free removal from the pallet
- Wide range of applications
- Medium open and setting time
E0931.3
Structural bonds with high demands on strength and reaction to changes in temperature
- Moisture curing
- Long open time
- Good solvent resistance
- High cohesion
EVA Hotmelt A0158.1
Universally All-purpose hot-melt adhesive for industry and handcraft
- Colour: white
- All-rounder for assembly in industry, household and floristry
- Four delivery forms available: 11 & 18 mm stick, slugs, granules
HB 4022 connect
The melter has a 22-litre non-stick melt tank with a buffer volume. This enables uninterrupted operation when refilling adhesive. The HB 4022 connect can be configured with up to two gear pumps. The hermetically sealable system is suitable for processing PUR or POR hot-melt adhesives.
HB 4100 connect
EVA, PSA and PO hot-melt adhesives can be heated up quickly in the 10-liter tank. The adhesives can be processed gently in the form of granules, blocks or pillows. The modern 7”colour touch display enables intuitive operation of the melter.
HB 45 BS Surface application head
The HB 45 BS is used to apply an adhesive film up to 35 mm wide.
- including 1 module
- layer thickness from 0.1 to 2 mm
- PT100 sensor (others available on request)
- Air opening / Air closing for excellent tear-off behaviour
- maximum application width of 10 mm to 35 mm
HB 5010 bead, gear pump
The HB 5010 is a hot melt adhesive tank system with gear pump, especially for manual applications.
- 4.5 litre capacity
- Robust and easy-to-clean plastic housing
- Fast heating-up in less than 30 minutes
- Intuitive user guidance
HB 5010 bead, gear pump
The HB 5010 is a hot melt adhesive tank system with gear pump, especially for manual applications.
- 4.5 litre capacity
- Robust and easy-to-clean plastic housing
- Fast heating-up in less than 30 minutes
- Intuitive user guidance
HB 6050 Connect
The latest generation of piston pump tank systems of the HB 6000 series now offers a touchscreen for faster operation. Suitable for EVA, PO and PSA hot melt adhesives.
Equipped with:
- 7″ touchscreen for intuitive operation
- New possibilities for integration into an existing peripheral
- Highest compatibility with Nordson and Robatech
HB 720 Spray
If materials have to be bonded together over a large area, the spray version is selected. With the spray version of the HB 720, different spray applications patterns can be realised.
- Wafer-thin spray film and thus lower consumption of hot-melt adhesive
- Process reliability through a consistent spray pattern
- Large-area application
Hot Melt Glue Gun HB 181
The Florist’s Favourite
- Small and handy
- Low operating force
- Universal stand, versatile storage or “parking” options
- Fixed nozzle (diameter 2.5 mm)
Hot Melt Hoses MT
Hot melt hoses for bead application heads in combinations with melters.
- Compatible with Nordson and Meltex
- High-Flex version
- Up to 210 °C in the standard version
- Lengths 1.8 m – 6.0 m
Module B400
The B400 standard module for point and bead application. Available in numerous module variants.
- Compatible with Nordson H200 / H400 series and SolidBlue S
- Compatible with Robatech AX100 series
- Compatible with ITW Dynatec