for Application Heads
Igle za čiščenje šob (komplet šestih igel)
Šobe lahko očistite s kompletom za čiščenje šob, sestavljenim iz šestih igel.
- Podaljša življenjsko dobo šob
- •Šobe za nanos linij in razpršilne šobe
- Za različne premere izvrtin
_200x150.jpg)
Časovno krmiljenje Smart Control
Smart Control omogoča natančne časovne intervale in programiranje vzorcev v zelo kompaktni obliki.
- Enostavno programiranje prek pametnega telefona/WiFi
- Natančno zajemanje časa in različni sprožilni intervali
- Možnost uporabe do 10 nanašalnih glav
- Kompaktna izvedba (7 x 4,5 x 2,5 cm)
Smart time control for 1-10 application heads
Rešitev časovnega krmiljenja za uporabo na ročnem delovnem mestu s priključeno ročno pištolo:
- Prosto programirljivi časovni intervali
- Možnost shranitve treh različnih programov
- Omogoča različne sprožilne intervale
- Možnost uporabe do 10 nanašalnih glav
Časovno krmiljenje za 6 nanašalnih glav
S časovnim krmiljenjem je mogoče prihraniti talilno lepilo.
- 8 različnih časovnih funkcij
- Enostavno upravljanje
- Časovno območje od 0,001 s do 999,9 h
- Visokokakovostno ohišje s 6 priključki za glave
Pattern control system
Use of the pattern control system can save up to 30% hot melt adhesive, as the adhesive can be applied in a series of small dots or beads, instead of a single long bead.
- Precise and consistent hot melt adhesive application
- Intuitive operation via 7“ touch screen
- High level of compatibility with all existing BÜHNEN application systems (tank systems and application heads)
- Programming of up to 100 recipes
Stainless steel nozzle VA-LL
- Without inserted capillary
- Good adhesive flow
- Precise application
- Thread: 3/8“ UNF
- Compatible with Nordson (Series H200 / H400 / SolidBlue / MiniBlue) Robatech and ITW-Dynatec (Micro)
Brass nozzle MS-VA
Standard brass nozzle with inserted capillary made of stainless steel
- Inserted capillary made of stainless steel
- Capillary lengths: 2.5 mm and 3.0 mm
- Compatible with Nordson (H200 / H400 / SolidBlue / MiniBlue series)
- Compatible with Robatech, ITW- Dynatec (Micro)
Spray nozzle MS WIDE
Brass spray nozzle MS in the version with 12 bore holes.
- 90° spraying angle
- One-piece design, no union nut required
- Self-sealing, no O-ring required
- Thread: UNF 1/2" x 20
- Compatible with Nordson H200CF series
Spray nozzle MS
Brass spray nozzle MS in the version with 7 bore holes.
- 60° spraying angle
- One-piece design, no union nut required
- Self-sealing, no O-ring required
- Thread: UNF 1/2" x 20
- Compatible with Nordson H200CF series
Long nozzle, steel
Bead nozzle for HB 910 Bead and HB 950 Bead
- Bead application
- Available in Ø 0.6 mm – 3.0 mm
- Thread: UNF 3/8″
Hot Melt Hoses for Application Heads - Spray
Hot melt hose for spray application heads in combination with melters.
- Standard temperature sensor PT100
- Up to 200 °C in the standard version
- Lengths 1.2 m – 6.0 m
Hot Melt Hoses for Application Heads - Bead
Hot melt hose for bead application heads in combination with melters.
- Standard temperature sensor PT100
- Up to 200 °C in the standard version
- Lengths 1.2 m – 6.0 m
Spacer plates BS20
The BS20 spacer plates are used in one4all surface application heads with BS20 modules.
- Stainless steel
- Layer thickness 0.15 to 0.5 mm
- Application width 15 mm, 20 mm
Spacer plates
Adapter cable for temperature control box
Adapter cable for the spray application head with integrated air preheater
- Temperature control box TRB-1
- Length 3 - 7 m