Hot Melt Hoses NS30 for application head - Bead
Prednosti in značilnosti opreme
Hot melt hoses for bead application heads in combination with melters.
- Compatible with Nordson series 2300 / 3000 / ProBlue
- High-Flex version
- Up to 200 °C in standard version
- Lengths 0.6 m – 10.0 m
Tehnični podatki
Področja uporabe
Opis
The NS30 hot melt hoses serve as a heated and flexible transport route for hot-melt adhesive, from a melter to a bead application head. The connecter can be set at an angle ranging from 0° to 90° by loosening two screws.
The hoses are available in different lengths and nominal widths (=diameter of the hose inner core). Should you not find the length you require here, please contact us.
Standard: Ni120 sensor, nominal width NW08, outer cap diameter 40 mm, High-Flex version
Optional: Spray version, exchangeable inner liner (recommended when using PUR or POR), VA sheathing (in the case that the outer sheath is extremely stressed), outer sheath in signal colours (orange)
Article number | Description | Remarks | Reference number |
NKT0081 | Hose NS30, NW08 | 0,6 m | 274790 |
NKT0082 | Hose NS30, NW08 | 1,2 m | 274791 |
NKT0083 | Hose NS30, NW08 | 1,8 m | 274792 |
NKT0084 | Hose NS30, NW08 | 2,4 m | 274793 |
NKT0085 | Hose NS30, NW08 | 3,0 m | 274794 |
NKT0086 | Hose NS30, NW08 | 3,6 m | 274795 |
NKT0415 | Hose NS30, NW08 | 4,0 m | |
NKT0357 | Hose NS30, NW08 | 4,2 m | |
NKT0087 | Hose NS30, NW08 | 4,8 m | 274796 |
NKT0405 | Hose NS30, NW08 | 6,0 m | 223836 |
NKT0088 | Hose NS30, NW08 | 7,2 m | 274797 |
NKT0328 | Hose NS30, NW08 | 8,0 m | |
NKT0089 | Hose NS30, NW08 | 10,0 m | 274798 |