Module B400
Prednosti in značilnosti opreme
The B400 standard module for point and bead application. Available in numerous module variants.
- Compatible with Nordson H200 / H400 series and SolidBlue S
- Compatible with Robatech AX100 series
- Compatible with ITW Dynatec
Tehnični podatki
Področja uporabe
Opis
The B400 module has short control air paths. This results in rapid opening and very precise closing movement of the piston with the nozzle needle for a clean adhesive application. It is a standard module for dot and bead application.
The modules can be installed in any position. The distance from the application surface depends on the desired application pattern.
The module is delivered with O-rings and two inch-screws. The air and adhesive channels to the applicator body are sealed with the O-rings. The screws are used to attach the module to the head body.
The module is a flange valve. The flange connection diagram is available on request.
| Article number | Description | Remarks | Compatible with | Reference No. |
| NKT0106 | Module B400 Standardmodul | Nordson Serie H200/H400 | 276119; 326583 | |
| NKT0467 | Module B400-FJ | With fine adjustment | Nordson | |
| NKT1124 | Module B400-ZC 0,60 | Needle seat module, different diameters available | Nordson | |
| NKT0934 | Module B550 | With milled cut-outs | Nordson SolidBlue S | |
| NKT1212 | Module B400-HT | High temperature up to 250°C | Nordson | |
| RKT0331 | Module B400-RB | Robatech Serie AX100 | ||
| DKT0382 | Module B-BF | ITW Dynatec |
Hot Melt Hoses for Application Heads - Bead
