HB 4200 FS Connect drum melter

Description

HB 4200 drum melter connect

When processing large quantities of hot-melt adhesive, the drum has proven to be the ideal delivery form. The drum melters from the HB 4000 connect series are designed so that only the contact surface of the adhesive is melted. The thermal load is thus reduced to a minimum.

Three different melting plates are available, depending on the required melting capacity and the thermal conductivity of the melting material. Melting capacities of 5 - 200 kg/h can be achieved through different melting plate geometries. The melting plates have a long-lasting endless sealing ring, which is used in smooth-walled drums. If you wish to use corrugated drums, please contact us.

The drum is ventilated automatically by means of a button. The three-phase motors guarantee continuous application of the melt. The system can process all standard containers of 200 kg.

Standard melting plates

26 mm surface with 26 mm melting ribs
for a medium melting performance: up to approx.100 kg/h*
The combination of the melting performance and low residual quantity makes this plate the BÜHNEN standard.

Optionally available:

Tandem drum melters

Tandem drum melters can be used for applications with a very high continuous demand. The switch from empty to full drum takes place automatically via a distribution block. A further option is to pour the hot-melt adhesives from a drum into a buffer device.

Smooth melting plate

With a smooth surface for a low melting performance: HB 4200 FS connect - ca. 25 kg/h*
The smooth melting plate enables the drum to be almost completely emptied.

Melting plate 40 mm
Surface with 40 mm melting ribs for a very high melting performance:
HB 4200 FS connect - ca. 150 - 200 kg/h*
The melting surface, which has been enlarged by 60%, enables a very high melting performance.

* depending on temperature and adhesive viscosity