TEMPL Monday html/com_virtuemart/productdetails/bueprod.php
Die aktuelle Sprache lautet: en-GB

Back to: Drum Melter

HB 4020 FS Connect drum melter

Advantages and equipment features

Small quantity of residue in the drum or hobbock
Two-handed operation for raising and lowering the drum
Clean change in a short time: The exchange drawer supplied as standard prevents the hot adhesive from dripping when changing the drum
Easily replaceable surface heating in the melting plate
Easy cleaning of the melting plate

Specifications

DITO bueprod_customfields_technik.php

Dimensions 1005 x 675 x 1650 mm

Weight 240 kg

Operating Voltage 3/N/PE 400 V, 50 - 60 Hz

Hose connection 2, 4

Melting capacity 5 - 25 kg/h

Pump system 1 gear pump

Delivery rate of pump > 40 kg/h

Tank diameter Ø 280 mm

Usable tank volume 20 l

Hot-melt adhesives PUR, POR, PSA

Application Areas

123456 TEMPL Monday html/com_virtuemart/productdetails/bueprod_customfields_awgs.php

Description

HB 4020 drum melter connect

When processing large quantities of hot-melt adhesive, the drum has proven to be the ideal delivery form. The drum melters from the HB 4000 connect series are designed so that only the contact surface of the adhesive is melted. The thermal load is thus reduced to a minimum.

Three different melting plates are available, depending on the required melting capacity and the thermal conductivity of the melting material. Melting capacities of 5 - 25 kg/h can be achieved through different melting plate geometries. The melting plates have a long-lasting endless sealing ring, which is used in smooth-walled drums. If you wish to use corrugated drums, please contact us.

The drum is ventilated automatically by means of a button. The three-phase motors guarantee continuous application of the melt. The system can process all standard containers of 8 /20 kg.

Standard melting plates

26 mm surface with 26 mm melting ribs
for a medium melting performance: up to approx. 12 kg/h*
The combination of the melting performance and low residual quantity makes this plate the BÜHNEN standard.

Optionally available:

Smooth melting plate
With a smooth surface for a low melting performance: HB 4020 FS connect - ca. 5 kg/h*
The smooth melting plate enables the drum to be almost completely emptied.

Melting plate 40 mm
Surface with 40 mm melting ribs for a very high melting performance: approx. 20 kg/h*
The melting surface, which has been enlarged by 60%, enables a very high melting performance.

* depending on temperature and adhesive viscosity

DITO SUBLAYOUTS/customfields.php / ALLE customfields eines Produktes einlesen