Accessory for HB 710 / 720 bead & spray
Console HB 720
Console for the HB 720 series
- Secure pick-up position
- Fixed storage of the gun
- Including pressure regulator
Workstation HB 720
For stationary use of HB 720 guns
- Fixed mounting in the stand
- Hands-free operation by means of the foot-operated switch
- Pressure regulator included
Spray nozzle set, Standard, Ø 1.5 mm
Spray nozzle set for HB 710 Spray
- Set: Swirl nozzle and air cap
- Diameter 1.5 mm
- Thread: M10 x 0.75
Nozzle base, Standard
For the use of bead nozzles with an HB 710 and HB 720 Bead.
- Direct mounting on the HB 710 / HB 720
- Bead application
- Thread: M10 x 1 on UNF ½ ″
Nozzle base for 3/8" nozzle
For the use of bead nozzles with an HB 710 and HB 720 Bead from the extended nozzle range with a 3/8" thread.
- Direct mounting on the HB 710 / HB 720
- Bead application
- Thread: M10 x 1 on UNF 3/8"
Bead nozzle adaptor for spray devices
For the use of bead nozzles with an HB 710 Spray.
- Direct mounting on the spray device
- Bead application
- Thread: M10 x 0.75 to UNF ½″
Wide slot nozzle
Wide slot nozzle for HB 710 Bead and HB 710 HT
- Slot width: 0.2 mm
- Film width: 16 or 30 mm
- Thread: UNF ½″
Swirl nozzle for spray application
Swirl nozzle for HB 710 Spray
- Diameter: 1.0 mm / 1.5 mm / 2.0 mm
- Thread: U10 x 0.75
Air cap with adaptor for check valve
Air cap with borehole for HB 710 Spray
- Incl. adaptor for check valve
- Diameter 1.0 and 2.0 mm
- Steel ball, compression spring and O-ring
Cone nozzle with capillary
Cone nozzle with capillary for HB 710 Bead and HB 710 HT
- Exact dot application
- Diameter: 0.7 mm
- Non-drip
Flat nozzle 2-hole
Flat nozzle 2-hole for HB 710 Bead and HB 710 HT
- Precise film application
- Film width 10 mm
- Thread: UNF ½″
Cone nozzle, Standard
Cone nozzle for HB 710 Bead and HB 710 HT
- Bead application
- Available Ø 0.8 mm / 1.0 mm / 1.5 mm / 2.0 mm
- Thread: UNF ½″
Bead application nozzle for spray devices
This nozzle enables a bead application with the HB 710 Spray.
- Direct mounting on the spray device
- Bead application
- Diameter 1.2 mm
- Thread: M10 x 0.75
Round tubular nozzle
Round tubular nozzle for HB 710 Bead
- Bead application
- Available Ø 1.0 mm / 1.5 mm / 3.0 mm
- Thread: UNF ½″
Cross rib for granulates
For use in the melting tank of the HB 710 series
- Better melting performance
- For granulates
- Bead and spray version
Heat-resistant protective gloves
Safe handling of hot glue: particularly cut and puncture resistant
- EN 388:2016, mechanical risks, 4X43E
- EN 407:2004, thermal risks, X2XXX
- DuPont™ Kevlar® fine knitted gloves
- Medium latex coating on palm for a good grip
Silicone underlay
Mat made of durable and high-quality silicone. Due to the non-stick property of the silicone, the hot melt adhesive can be easily removed.