B301-F-TL Spray application head
Advantages and equipment features
The B301-F-TL application head has two heating cartridges that guarantee rapid heat-up. The spray application width is 10 – 40 mm.
- Compatible with Nordson and Robatech
- For spray application
- With integrated filter
Specifications
Application Areas
Description
Due to its good price-performance ratio, the B301-F-TL spray application head is the standard head for spray application in the one4all area.
Two 80 W heating cartridges are inserted into the application head, which enable rapid heat-up to operating temperature.
The ready-to-use application head must be firmly installed on the head bracket. Any holding rod must have, for example, the same diameter as the clamping hole in the bracket (Ø 12 mm).
The hot-melt adhesives are heated in the melter and conveyed to the application head by means of a heated hose. The application head contains the B200 module (compatible with Nordson H200) and a T-piece for connecting the spray air.
The spray pattern can be individually adjusted by turning the screw on the spray air throttle valve.
The solenoid valve and matching nozzle are available separately.
Can be ordered in different versions compatible with Nordson or Robatech.
| Article number | Description | Sensor | Compatible with |
| NKT0355 | Spray application head B301-F-TL | Ni120 | Nordson |
| RKT0391 | Spray application head B301-F-TL-RB | NTC | Robatech |
Spray nozzle MS
HB 6100 - connect
Nozzle cleaning needles (Pack of 6)