Hot Melt Hoses NS30 for application head - Bead
Advantages and equipment features
Hot melt hoses for bead application heads in combination with melters.
- Compatible with Nordson series 2300 / 3000 / ProBlue
- High-Flex version
- Up to 200 °C in standard version
- Lengths 0.6 m – 10.0 m
Specifications
Length
0,6 – 10,0 m
Operating Voltage
230 V
Temperature sensors
Ni120
Operating temperature
up to 210 °C
Application Areas
Description
The NS30 hot melt hoses serve as a heated and flexible transport route for hot-melt adhesive, from a melter to a bead application head. The connecter can be set at an angle ranging from 0° to 90° by loosening two screws.
The hoses are available in different lengths and nominal widths (=diameter of the hose inner core). Should you not find the length you require here, please contact us.
Standard: Ni120 sensor, nominal width NW08, outer cap diameter 40 mm, High-Flex version
Optional: Spray version, exchangeable inner liner (recommended when using PUR or POR), VA sheathing (in the case that the outer sheath is extremely stressed), outer sheath in signal colours (orange)
| Article number | Description | Remarks | Reference number |
| NKT0081 | Hose NS30, NW08 | 0,6 m | 274790 |
| NKT0082 | Hose NS30, NW08 | 1,2 m | 274791 |
| NKT0083 | Hose NS30, NW08 | 1,8 m | 274792 |
| NKT0084 | Hose NS30, NW08 | 2,4 m | 274793 |
| NKT0085 | Hose NS30, NW08 | 3,0 m | 274794 |
| NKT0086 | Hose NS30, NW08 | 3,6 m | 274795 |
| NKT0415 | Hose NS30, NW08 | 4,0 m | |
| NKT0357 | Hose NS30, NW08 | 4,2 m | |
| NKT0087 | Hose NS30, NW08 | 4,8 m | 274796 |
| NKT0405 | Hose NS30, NW08 | 6,0 m | 223836 |
| NKT0088 | Hose NS30, NW08 | 7,2 m | 274797 |
| NKT0328 | Hose NS30, NW08 | 8,0 m | |
| NKT0089 | Hose NS30, NW08 | 10,0 m | 274798 |
B45-70 Surface application head
