Delivery form

The delivery form of the hot-melt adhesive can vary depending on the application technique and the type of adhesive. It is important that both are coordinated. Some common forms of delivery are, for example, granules, cartridges or blocks.

In the case of reactive hot-melt adhesives, the packaging must protect the adhesives from ambient humidity in order to prevent premature reaction. The adhesive in the melters must also be shielded from humidity.

The first number after the letter in the item number of the BÜHNEN hot-melt adhesives is the code of the delivery form. 

 

 

Delivery forms of BÜHNEN hotmelt adhesives:

Delivery form 1 - Slugs

Slugs with Ø approx. 42 mm and a length of approx. 50 mm for pneumatic hot-melt glue guns

Delivery form 2 - 11mm Sticks

Sticks with a diameter of Ø approx. 11.3 /12 mm and a length of approx. 200 mm for mechanical hot-melt glue guns

Delivery form 3 - 18mm Sticks

Sticks with a diameter of Ø approx. 18 mm and a length of approx. 300 mm, especially for the HB 326

Delivery form 4 - Granules

Loosely poured granulate for pneumatic hotmelt guns and melters

Delivery form 5 - Blocks / Meltpacks

Blocks from approx. 500 g to 4 kg for melters

Delivery Form 6 - Pillows

Pillows for melters

Delivery form 7 - 310ml Cartridge

Cartridges with a diameter of Ø approx. 47 mm and a length of approx. 215 mm.

Content 310 ml for pneumatic hotmelt guns

Delivery form 9 - cardboard sleeve

Weight 1.8 - 2.0 kg for drum and bag melters

Delivery form 9 - Pullring can

Weight 2.0 kg for drum and bag melters

Delivery form 9 - Hobbock

Hobbock with a weight of 20 kg for drum and bag melters

Delivery form 9 - Steel hobbock

Steel hobbocks for drum and bag melters are available from 20 to 200 kg